Wednesday, January 27, 2010

Fence Leaner How To Fix A Leaning Fence?

How to fix a leaning fence? - fence leaner

Seven Posts foot wooden privacy fence is tilted because the land slopes. How do I get a vertical wall, without taking out the items? Contributions are not specific, only dirt.

3 comments:

  1. Heres what you do .. To push someone to the post, until they are straight. You need a hammer and a piece of wood. Probably a 2 for 4 to 2 meters. Although the situation is that 2 instead of 4 in space, where the position is based. This will be the end of the book for one or two years. But I do it all the time. Might even cut in 2 by 4 ½ inches, if you meet problems, but it works / / Make sure that at an angle so that its agaist during the sustained contribution ..

    ReplyDelete
  2. The contributions are probably rotten and must be replaced. Sorry, but I had it twice in the 18 years I lived in my current home to do.

    If you do not rotted, you can possibly repel, while another person Tamps soil around the "low" next to the entrance.

    The replacement of the pressure-treated posts will last much longer.

    Bert

    ReplyDelete
  3. If you want, the more "permanent solution" to. First, check that the sections of the fence with 2x4 to maintain their stability. Then, with a shovel, post hole, I want a hole next to the bodies, not to make too. You want the hole as deep as possible over 3 feet should be fine dig () depending on location. Hotch Stringer to make room for the new position. Create a new pressure treated 4x4 posts 8th You add in a bag or two in the concrete and water pouring. No need to mix. Plumb the new position.

    Let cure at least 48 hours.

    Secure old entrance to the new position with screws 24th

    ReplyDelete